Removing the wireless card
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
Prerequisites
1
Remove the
base
2
Remove the battery.
Procedure
1
Locate the wireless card on the system board.
2
Remove the screw (M2x3) that secures the wireless-card bracket to the wireless
card and the system board.
3
Remove the wireless-card bracket from the wireless card.
4
Using a plastic scribe, disconnect the antenna cables from the wireless card.
34
computer. After working inside your computer, follow
After working inside your
cover.
computer. For more safety best
www.dell.com/
Before