Table of Contents
Advertisement
After approximately five seconds, the flashing
stops and the display shows the time of day you
set.
Changing the time
You cannot change the time of day if
the Duration
operates.
Press
again and again until the indicator for
the Time of Day function flashes.
To set a new time, refer to "Setting the time".
Preheating
Preheat the empty appliance to burn off the
remaining grease.
Daily use
WARNING!
Refer to Safety chapters.
Oven functions
Oven function
Gas block warning indicator
This light comes on to indicate gas block and a
burner shutdown. To eliminate the block, turn
the knob for the oven functions and the knob for
the temperature to the Off position "0", wait for
one minute and then repeat the lighting
operation.
www.zanussi.com
or End
function
Off position
The appliance is off.
Light
To activate the lamp without a cooking function.
Grill
To grill flat food items in small quantities in the middle of the
shelf. To make toasts.
Grill + Turnspit
To grill meat, including kebabs and smaller pieces of meat.
Gas oven
See the cooking tables.
1. Set the function
temperature.
2. Let the appliance operate for 1 hour.
3. Set the function
temperature.
4. Let the appliance operate for 15 minutes.
Accessories can become hotter than usual. The
appliance can emit an odour and smoke. This is
normal. Make sure that the airflow in the room is
sufficient.
Let the oven cool down. Dampen a soft cloth
with warm water and a little mild washing-up
liquid and use this to clean the oven cavity.
Application
Temperature indicator
The temperature indicator comes on when the
oven heats up. It goes off when the oven is at its
correct temperature. It then cycles on and off to
show that the temperature adjusts.
and the maximum
and the maximum
7
Advertisement
Table of Contents
