Setting And Changing The Time; Setting The End; Setting The Time Delay Function; Setting The Duration - Zanussi ZOP37902BK User Manual

Clock function
TIME DELAY
MINUTE MINDER
00:00 COUNT UP TIMER

Setting and changing the time

After the first connection to the mains, wait until
the display shows
flashes.
1. Press or to set the hours.
2. Press to confirm and switch to set the
minutes.
The display shows
flashes.
3. Press or to set the current minutes.
4. Press to confirm or the set time of day
will be saved automatically after 5 seconds.
The display shows the new time.
To change the time of day press
again until the indicator for the time of day
flashes in the display.

Setting the DURATION

1. Set an oven function.
2. Press again and again until
flash.
3. Press or to set the minutes and the
hours for DURATION time.
4. Press to confirm.
When the time ends an acoustic signal sounds
for 2 minutes. and time setting flash in the
display. The appliance deactivates
automatically.
5. Press any button to stop the acoustic
signal.
6. Turn the knob for the oven functions to the
off position.
www.zanussi.com
To combine DURATION and END function.
Use to set a countdown time. This function has no effect on the
operation of the appliance. You can set the MINUTE MINDER at
any time, also if the appliance is off.
If you do not set any other clock function the COUNT UP TIMER
automatically monitor how long the appliance operates. It is on
immediately when the oven starts to heat.
The Count Up Timer cannot be used with the functions: DURA-
TION, END.
and "12:00". "12"
and the set hour. "00"
again and
starts to
Application

Setting the END

1. Set an oven function.
2. Press again and again until
flash.
3. Press or to set the hours and the
minutes for END time.
4. Press to confirm.
At the set time an acoustic signal sounds for 2
minutes. and time setting flash in the
display. The appliance deactivates
automatically.
5. Press any button to stop the acoustic
signal.
6. Turn the knob for the oven functions to the
off position.

Setting the TIME DELAY function

1. Set an oven function.
2. Press again and again until
flash.
3. Press or to set the minutes and the
hours for DURATION time.
4. Press to confirm. The display shows
flashing .
5. Press or to set the hours and the
minutes for END time.
6. Press to confirm.
Appliance turns on automatically later on, works
for the set DURATION time and stops at the set
END time. At the set time an acoustic signal
sounds for 2 minutes.
in the display. The appliance deactivates.
7. Press any button to stop the acoustic
signal.
starts to
starts to
and time setting flash
9