Parameters; Parameter Structure - ABB ACS255 User Manual

38

9. Parameters

9.1. Parameter Structure

The parameters within the drive are split into 2 groups, group 1 is titled "Short Parameter mode" displayed as "Par S" on the drive display
and group 2 is titled "Long Parameter mode" displayed as "Par L" on the drive display.

"Par S" group brings together the most commonly used parameters to aid quick setup.

"Par L" group includes all of the drive parameters.
9.1.1. Group Navigation.
Press to exit "Short/Long Parameter group
selection mode" and save selection
9.1.2. Parameter Structure table.
"Status Mode"
Press for >1sec to enter
"Short/Long Parameter group
selection mode"
Use to select Short " PAr SH " or
Long " " group parameters
PAr LH
"Parameter mode"
(End number flashing)
PAr SH
Parameter No.
9902
9905
9906
9907
0401
1103
1202 ABB Short parameter group
(1611 not set to "101")
1203
1204
1301
2008
2102
2202
H StoPH
Timeout (300s)
PAr SH
P9902H
PAr LH
Parameter No.
0000
0401
1100
1103
1202
1203
1204
1205
3400
4001
4002
4005
4010
4011
4016
5302
Long parameter group (1611 =
9902
"101")>>(Currently selected
9905
via keyapd "PAR L" on
9906
ACS150)
9907
9908