Advertisement
Butcher Block Care: For best results, clean finished butcher block surfaces with soapy water or commonly
available kitchen counter top cleaners. Do not use abrasives or powder cleansers. Do not allow moisture stand on
the surface for prolonged periods of time. To sanitize, rinse the butcher block with white vinegar by using a
vinegar-water solution in a spray bottle, spritz the butcher block all over. Let sit for a while. While that sits, make a
lemon salt mixture by pouring about 1/4 cup salt into a bowl, and stir in enough lemon juice to make a paste,
adjust the consistency as you go, to make a workable paste. The final step, using a scrub brush, thoroughly scrub
your butcher block with the lemon-salt paste. If the paste gets too dry, sprinkle on a little more lemon juice. Rinse
well, and squeegee off as much water as you can, and then let it dry overnight. Make sure to seal it before you
get it dirty again. Pour out a small amount of oil, and rub it into the wood using a cloth or paper towel. As the oil
soaks in, add more and continue rubbing and polishing with the grain until the oil is absorbed. The first time you
seal your butcher block, it may take several applications before it stops "drinking" oil, but in later cleanings you'll
just need to refresh it. Keep adding oil until no more soaks in, remove any excess with a cloth.
Wicker Furniture Care: Regular cleaning is recommended for wicker, as it generally cannot endure harsh or
abrasive treatments. This also minimizes mildew buildup. To remove dirt and debris, vacuum with a dust-brush
attachment or use a dry paintbrush. Clean with a mild soap solution. Scrub, and rinse. Avoid using too much
water, which can weaken the fibers. Avoid sitting on the wicker when still damp, which can cause wicker to sag.
Please always cover the furniture when not in use, and store properly during inclement weather and the
winter/rainy seasons. If wicker furniture is caught during a sudden rain storm, please make sure to drain any
water that may have accumulated inside the frame.
Metal Furniture Care: Because most metals, except aluminum, are subject to rust, metal furniture is usually
finished with layers of clear varnish, paint, or a durable powder coating. Use a mild soap solution, and scrub,
rinse, and dry. Make sure to drain any water that may accumulate inside the frames after rinsing. After cleaning,
apply a coat of quality liquid or paste auto wax with a lint-free cloth. Use a silicone spray to lubricate swivels and
glides on chairs. If metal outdoor furniture is caught during a sudden rain storm, please make sure to drain any
water that may have accumulated inside the frame.
Outdoor Cushion Care: Please note our cushions are made from a high density polyester foam, and the covers
are made from a moisture resistant polyester blend. This does not mean they are waterproof! We do not
recommend leaving cushions out in inclement weather, and if cushions become wet, please dry them immediately
by removing the cushion from the cover so they can dry separately. Wring out any excess moisture before drying.
Air dry only! Cushion covers are machine washable (gentlest cycle with like colors and cold water), and we
recommend separating the cushion cover from the core for any cleaning purposes. Always air dry the cushion
covers and cushion cores after wringing out excess moisture, and do not attempt to wash cushion cores.
Cushions should be stored and covered when not in use to protect them from rain, sunlight, and other staining
agents.
Outdoor Furniture Storage: We highly recommend storing any outdoor furniture during inclement weather,
winter and/or the rainy season. Before storing your furniture, please ensure all moisture collected in the frame
tubes has been drained. When outdoor furniture is not in use, we recommend covering all the furniture to protect
it against the elements. If outdoor furniture is caught during a sudden rain storm, please make sure to drain any
water that may have accumulated inside the frame.
Coastal Customers: Due to the corrosive nature of salt, extra care must be taken due to the higher salinity in the
air as well as the possibility of direct contact from sea spray. Keep outdoor metal/wicker furniture covered when
not in use, and rinse with fresh water on a regular basis to prevent salt accumulation. Make sure to drain any
water that may accumulate inside the frames after rinsing. Additional protection in the form of protective
transparent sealer is recommended as well.
Advertisement
