Hardware Support; Wake-Up Devices And Events - Intel NUC5PGYH Technical Product Specification

1.12.1.2

Wake-up Devices and Events

Table 8 lists the devices or specific events that can wake the computer from specific states.
Table 8. Wake-up Devices and Events
Devices/events that wake up the system...
Power switch
RTC alarm
LAN
USB
PCIe via WAKE#
Consumer IR
Bluetooth
Notes:
1. Monitor will remain in "sleep" state
2. "S5 WoL after G3" supported w/Deep Sleep disabled
3. Wake from S4 and S5 only supported w/Deep Sleep disabled
4. Wake from device/event not supported immediately upon return from AC loss
NOTE
The use of these wake-up events from an ACPI state requires an operating system that provides
full ACPI support. In addition, software, drivers, and peripherals must fully support ACPI wake
events.
1.12.2

Hardware Support

The board provides several power management hardware features, including:
Wake from Power Button signal
•
• Instantly Available PC technology
LAN wake capabilities
•
Wake from USB
•
• WAKE# signal wake-up support
Wake from S5
•
• Wake from CIR
+5 V Standby Power Indicator LED
•
NOTE
The use of Wake from USB from an ACPI state requires an operating system that provides full ACPI
support.
...from this sleep state
S3, S4, S5
(Note 1)
S3, S4, S5
(Notes 1, 2)
S3, S4, S5
(Note 3, 4)
S3, S4, S5
(Note 1)
S3, S4, S5
S3, S4, S5 (Notes 3, 4)
N/A
Product Description
Comments
Monitor to remain in sleep state
"S5 WOL after G3" must be supported;
monitor to remain in sleep state
Wake S4, S5 controlled by BIOS option
Via WAKE; monitor to remain in sleep state
Wake from Bluetooth is not supported
33