Introduction; Safety Information - Martin Professional Exterior 200 User Manual

I
NTRODUCTION
Thank you for selecting the Martin Exterior 200. The Exterior 200 is an
automated 150 watt color-changing floodlight designed for fixed exterior
installation. It features seamless cyan, magenta, yellow (CMY) color mixing
and full-range continuous dimming. The fixture may be operated with DMX
controllers or in stand-alone mode with programmable start and stop times
or light levels.
The Exterior 200's field angle with the standard lens 70°. Accessory lenses
are available to provide a narrow 36° field or an asymmetric 90° by 70° field.
S A F E T Y I N F O R M A T I O N
Warning! This product is not for household use.
This product presents risks of lethal or severe injury due to fire and heat,
electric shock, ultraviolet radiation, lamp explosion, and falls. Read this
manual before powering or installing the fixture, follow the safety
precautions listed below and observe all warnings in this manual and on the
fixture. If you have questions about how to operate the fixture safely, please
contact your Martin dealer or call the Martin 24-hour service hotline at +45
70 200 201.
Guarding against electric shock
• Disconnect the fixture from AC power before removing or installing the
lamp, fuses, or any part.
• Always ground (earth) the fixture electrically.
• Use only a source of AC power that complies with local building and
electrical codes and has both overload and ground-fault protection.
• Refer all service to a Martin service technician.
Preventing UV radiation and lamp explosion
• Never operate the fixture with missing or damaged lenses and/or covers.
• When replacing the lamp, allow the fixture to cool for at least 15 minutes
before opening the fixture.
4

Introduction

1