Operation
Choose from the following fold types:
Single fold
Double
parallel fold
Zigzag fold
with binding
egde
TEST
START / STOP
TEST
START / STOP
Letter fold
Zigzag fold
Select the required fold type.
Press the TEST button two test folds are
carried out.
At the end of the test, there is a beep.
Check the folds.
Press "START/STOP". The device begins the
continuous folding process.
If you wish to interrupt or stop the process,
press the "START/STOP" button again. Once
restarted, the Total counter will continue
counting.
If the Preset counter is required, change this
accordingly (see Page 28).
Gate fold
13