Calling Resident - Vezco VZ-IP-TCAMIDS-WI Quick Start Manual

Video Intercom Indoor Station·Quick Start Guide
Figure 4-12 Indoor Station
Adding Interface (Indoor
Extension)
5. Enter the IP address of the indoor station, and press the tab to save the settings.

4.4 Calling Resident

Steps:
1. Press the tab on the touch screen to enter the residents calling
interface.
2. Enter the corresponding resident's Room No..
3. Press the tab to start a video intercom call.
4. Press the tab to stop the video intercom call.
 Generally speaking, Room No. format should be like 1-2-3-405 as Project 1,
Community 2, Building 3, and Room 405. The project No. can be omitted.
 Switch
to on the upper right corner to enable the camera function.
 The Room No. can be automatically saved into the contact list.
 Indoor extension does not support this function.
20