Adding Devices - Vezco VZ-IP-TCAMIDS-WI Quick Start Manual

4. Press the
5. Enter a local IP address, subnet mask, and gateway.
6. Press the tab to save the settings.
 Enable DHCP function to obtain an IP address automatically.
 Please enable Same LAN function if the indoor stations and indoor extensions are in
the same local area network with other video intercom devices in a community, or the
indoor extensions will not work normally.

4.3.4 Adding Devices

Adding Device (Indoor Station)
Purpose:
The indoor station never works alone. You can connect the main door station, IP camera,
SIP server, SCP (Security Control Panel), DVR/DVS/NVR, and so on. Once connected,
those devices can work together as a whole video intercom system.
 Connecting the main door station and adding IP camera will be introduced in the
quick start guide. For further information about SIP server setting, SCP (security
control panel) settings, DVR/DVS/NVR settings, and doorphone settings, please refer
to the user manual in the disk.

Connecting Main Door Station
Steps:
1. Press the Settings tab on the touch screen.
2. Press the Configuration tab and enter the admin password (configuration password).
3. Press the Device tab to enter the device management interface.
Video Intercom Indoor Station·Quick Start Guide
tab to pop up network settings dialogue box.
Figure 4-8 Setting Network
17