Installation And Wiring; Indoor Station Installation; Installation Plate - Vezco VZ-IP-TCAMIDS-WI Quick Start Manual

Name
ALARM OUT
(Alarm Output)
ALARM IN
(Zone Input)

2 Installation and Wiring

2.1 Indoor Station Installation

To install the indoor station onto the wall, an installation plate and a gang box are
required. The gang box of 8-series and 6-series indoor stations is the same.

2.1.1 Installation Plate

Please refer to the following figures for the dimensions of the installation plate of type II
6-series models and 8-series model.
Video Intercom Indoor Station·Quick Start Guide
No. Interface
A6 GND
A7 COM1
A8 NO1
A9 COM2
A10 NO2
B1 JIN8
B2 JIN7
B3 JIN6
B4 JIN5
B5 GND
B6 GND
B7 JIN4
B8 JIN3
B9 JIN2
B10 JIN1
Description
Grounding
Alarm Relay Output Terminal 1 (Dry Contact)
Alarm Relay Output Terminal 2 (Dry Contact)
Zone Detector Input Terminal 8
Zone Detector Input Terminal 7
Zone Detector Input Terminal 6
Zone Detector Input Terminal 5
Grounding
Grounding
Zone Detector Input Terminal 4
Zone Detector Input Terminal 3
Zone Detector Input Terminal 2
Zone Detector Input Terminal 1
4