Before You Start - Vezco VZ-IP-TCAMIDS-WI Quick Start Manual

Interface
ALARM IN
ALARM OUT
GND 12V
LAN

3 Before You Start

For the first time use of the device, you are required to activate the device and set the
device password. You can activate the device on the UI, via internet with Batch
Configuration Tool, or with VEZPRO client software.
To activate the device on the UI, refer to chapter 5 and enter the
configuration password.
To activate the device with Batch Configuration Tool or VEZPRO, refer to
6.1 and the user manual in the disk.
To configure the key parameters of device on the user interface of indoor station, you
are required to input the admin password.
 The default admin configuration password is 888999.
 The default unlocking password and arming/disarming password are 123456;
 The default duress code is 654321.
You must change these default credentials to protect against unauthorized access to the
product. Please refer to the user manual for changing passwords.
Video Intercom Indoor Station·Quick Start Guide
Table 2-1 Description of Indoor Station Interfaces
Connect alarm device, with one end of the device connecting
to JINx and the other end connecting to GND (x indicates
Connect alarm output devices.
Connect to DC power supply 12V.
Network port of indoor station. Connect the indoor station to
the same LAN with the door station. (Support POE)
Description
number between 1~8).
9