Adding Device; Adding Online Device - Vezco VZ-IP-TCAMIDS-WI Quick Start Manual

5.3 Adding Device

The software provides 4 ways for adding the devices. You can add the active online
devices within your subnet, add devices by IP address, add devices by IP segment or add
devices by device port No. range.
Adding online devices and adding device by IP address will be introduced in the quick
start guide. For another two ways (adding devices by IP segment, and add devices by
device port No.), please refer to the user manual in the disk.

5.3.1 Adding Online Device

Steps:
1. Run the software to enter the main interface of video intercom batch configuration
tool software.
2. Select an online device or hold the Ctrl or Shift key to select multiple devices in the
online devices list in the lower part of the batch configuration software interface.
Video Intercom Indoor Station·Quick Start Guide
Figure 5-4 Main Interface of
24
Batch Configuration
Software