Status Led - Ambir ImageScan Pro 800ix series Installation And Setup Manual

Appearance
No Display

Status LED

The front panel LED indicates the scanner status.
Light
Blue The scanner is turned on, ready to scan images.
The scanner is in standby mode (sleep mode). Default timeout
Orange is 10 minutes. The timeout can be changed or disabled by
clicking Start> All Programs> ImageScan Pro> Scanner Utility
The scanner is o , either because the power is not turned on,
O or because the AC adapter is not properly plugged into an AC
power outlet.
Status
AmbirScan ADF is launched, the scanner is
connected and ready to scan images.
The scanner is not connected with the computer, or
scanner power is off, or the scanner is in standby mode
(press any button on the scanner or load a document in
the feeder to exit standby mode).
AmbirScan ADF is not running. The scanner may or may
not be connected to the computer. Start AmbirScan
ADF by clicking on Start> All Programs> Ambir
ImageScan Pro> AmbirScan ADF
Status
11