Underside - Toshiba dynadock WiAC User Manual

TM
dynadock WiAC
Component
HDMI out port
DisplayPort
HDMI out port and DisplayPort can be used simultaneously for a dual
display.

Underside

The following illustration shows the underside of the dynadock. For a
description of each component, refer to the accompanying table.
(Sample Illustration) The underside of the dynadock
1. Hook holes
Component
Hook holes
Reset button
Ensure the dynadock is powered on before it restarts completely.
EN-18
Description
HDMI out port can connect with Type A connector
HDMI cable (supports video and up to 5.1
surround sound). An HDMI cable sends video and
audio signals. In addition, it can send and receive
control signals.
This port is for a connection to a DisplayPort
device.
1
2
Description
These two holes allow you to mount the dynadock
to any other available place by using the provided
wall mount parts.
Use a slender object (such as a pin) to press and
hold the reset button about 15 seconds until the
power indicator becomes quick-flash from slow-
flash. And then release the button and wait the
dynadock to reboot to its factory default settings.
2. Reset button
1
User's Manual