Configuring Audio Recording Ports (Microphone); Configuring Video Ports; Connection; Viewable Screens - Toshiba dynadock WiAC User Manual

Configuring audio recording ports (Microphone)

1. Right-click the speaker icon in the Notification Area of your Windows
desktop.
2. Select Recording Devices from the menu.
3. On the Recording tab of the dialog box, select one of the following:
■
■
4. Click Set Default.
5. Click OK.
6. Connect your recording device to the jack you enabled in step 3.

Configuring Video Ports

Connection

The dynadock provides the following video ports:
HDMI – for connection to HDMI (using the HDMI cable which is not
provided) interface monitors. (up to 2560 x 1440 pixels)
DisplayPort – for connection to DisplayPort (using the DisplayPort
cable which is not provided) interface monitors. (up to 2560 x 1600
pixels)
■
The icon (
display to the dynadock.
■
When using the DisplayPort and the HDMI out port simultaneously, the
resolution is up to 2048 x 1152 pixels.
Connect the monitor cable (not provided) to the video output port on the
dynadock and the external monitor. This cable can be connected and
disconnected any time without disconnecting the dynadock from your
computer.
You can customize the video settings of the dynadock. See section for more
information.

Viewable screens

The dynadock video drivers give you the option of viewing a total of four
screens:
■
the screen on the computer
■
an external monitor connected to the video port on the computer (if
available)
■
two external monitors connected to the dynadock
User's Manual
A Realtek High Definition Audio device—to use the Microphone
jack or headphone/microphone combo jack of the docked computer
A dynadock Audio device—to use the headphone/microphone
combo jack of the dynadock
) appears in the system tray after connecting an external
TM
dynadock WiAC
®
EN-23