Automatic Keeping Warm Function; Quick Start (Programmable); System Lock - Miele M 6012 SC Operating Instructions Manual

Automatic keeping warm
function
The keeping warm function will switch
on automatically after the end of a
cooking programme which has used at
least 450 W, providing the door remains
closed and no buttons are pressed.
After approx. 2 minutes the keeping
warm function will switch on at 80 W for
a maximum period of 15 minutes.
, 80 W and H:H will light up in the
display.
Opening the door or operating one of
the buttons or selectors while the
keeping warm function is in progress
cancels the function.
The keeping warm function cannot be
set separately.
You can deactivate this function (see
"Changing settings").

Quick start (programmable)

Pressing Start/ is sufficient to set the
appliance operating at maximum
power.
You can choose between three set
times that are stored in the memory:
 30 s: press Start / 1 x
 1 min: press Start / 2 x
 2 min: press Start / 3 x
Pressing Start / four times in
succession will bring back the first
stored duration and so on.
The cooking duration can be increased
by pressing Start during operation.
Each time it is pressed, the cooking
duration is increased by another
30 seconds.
Programming durations
Set durations can be altered.
 Press Start/ to select the saved
duration you want to re-programme
(press once, twice or three times) and
hold Start/.
 At the same time, alter the duration
with the time selector (to max.
15 minutes).
The altered programme starts running
when Start/ is released.
An interruption to the power supply
will cancel any altered programmed
durations, and they will need to be
re-entered.

System lock

The system lock prevents the appliance
being used unintentionally, for example
by children.
Activating the system lock
 Press and hold the Stop/C button
until a signal tone sounds and the key
symbol appears in the display:
The key symbol will go out after a short
time.
The key symbol reappears whenever
any button or one of the rotary selectors
is operated.
After an interruption to the power
supply, the system lock will need to
reactivated.
Operation
31