Advertisement
Quick Links
Advertisement
Related Manuals for Vision BP650
Summary of Contents for Vision BP650
-
Page 2: Table Of Contents
INDEX 1. Introduction ……………….………………...…………………………......... 2. Safety instructions …………..………………………………………………………………….….. 3. Specifications ……………………………………………………………….…..……….…………. 4. System description …..……..…………………………………………………………..….…..….. 4.1. Front panel ……………..……………………………………………………………………… 4.2. Back panel …………………………...………………………………………………………… 5. Installation & operation ……………….…..…………………………………………………….…. 5.1. Unpacking and control ……………………………………………………………………….. 5.2. Charging before first use …………………………………………………………………….. 5.3. Placement ……………………...……………………………………………………………… 5.4. -
Page 3: Specifications
The mains socket outlet that supplies the UPS shall be installed near the UPS unit and shall be easily accessible. 3. SPECIFICATIONS LED Model BP650 BP850 BP1100 BP1300 BP1600 BP2200 &... -
Page 4: System Description
Operating environment Ambient temperature 0°C à 40°C Operating humidity < 90% without condensation 4. SYSTEM DESCRIPTION 4.1. Front panel ① Mains power switch ② LED Indicators: Mains mode: The green LED is lighting (650-1300VA). The left green LED is lighting & the 1st to 4th green LED are gradually lighting and in line with the load level (1600-2200VA). -
Page 5: Installation & Operation
5. INSTALLATION & OPERATION 5.1. Unpacking and control Remove the packaging from the UPS and inspect it for eventual transport damage. If any damage is discovered, repack the unit and send it back to the seller. 5.2. Charging before first use Tis unit was sent ex-factory with its internal battery fully charged;... -
Page 6: Trouble Shooting
6. TROUBLE SHOOTING Symptom Possible cause Solution No LED indication on the 1. The battery is weak. 1. Charge the battery during 8 hours. front panel display. 2. Battery fault. 2. Replace the battery with a new one of same type. 3.