Unpacking; Contents Of The Shipping Container - Powermatic WB-37 Operating Instructions And Parts Manual

Unpacking

Open shipping container and check for shipping
damage. Report any damage immediately to
your distributor and shipping agent. Do not
discard any shipping material until the sander is
installed and running properly.
Compare the contents of your container with the
following parts list to make sure all parts are
intact. Missing parts, if any, should be reported
to your distributor. Read this instruction manual
thoroughly for assembly, maintenance and
safety instructions.
Read and understand the entire contents of this manual before attempting set-up
or operation! Failure to comply may cause serious injury.

Contents of the Shipping Container

1 Sander
2 Sanding belts (100 and 180 grit)
1 Felt pad
1 Graphite strip
1 Tool box containing:
1 Door key
1 Platen pull hook
1 Adjusting rod
2 Limit switch tubes
1 Flat blade screwdriver
1 Cross point screwdriver
3 Open-end wrenches, 8-10, 12-14, 17-19
1 Set of hex wrenches
1 Owner's manual
1 Warranty card
8