Table of Contents
Advertisement
USER INSTRUCTIONS
4.2.1
Adding the rinse-aid
The rinse aid helps the dishes dry faster and prevents the formation of scale de-
posits and staining; it is automatically added to the water during the fi nal rinse
cycle, from the container situated on the inner side of the door .
To add rinse aid:
•
Open the door.
•
Rotate the container cover (ref. A fi g. 4-04) anticlockwise by ¼ of a turn and
remove it.
•
Add the rinse aid until the container is full (approximately 140 ml). The optical
level indicator (ref. B fi g. 4-04), on the side of the cap should be completely ob-
scured. Refi ll the rinse aid when the optical level indicator becomes clear again,
or when the rinse aid warning light illuminates (see "Description of controls"
manual).
•
Replace the cover (ref. A fi g. 4-04) by turning it in a clockwise direction until it
is fully closed.
•
Use a cloth to remove any spillage of rinse aid which might lead to the forma-
tion of excess foam.
4.2.2
Adjusting the rinse-aid dispenser setting
The rinse-aid dispenser can be set to one of 6 diff erent levels. The dishwasher is
factory set for medium water hardness (selector set to "3"). To change the setting,
turn the dispenser selector (ref. c fi g. 4-04) to the desired position: the amount of
rinse-aid dispensed is proportional to the position of this selector. Make sure that
the minimum amount of rinse-aid (selector turned to "1") is approximately 1 ml
and the maximum amount (selector turned to "6") is approximately 6 ml.
Rev 0.0
B
C
A
Fig. 4-04
21
EN
Hide quick links:
Advertisement
Table of Contents
