Table of Contents
Advertisement
EN
Prolonged disuse
•
Run the soak program
•
Unplug the power
•
Leave
the door slightly open in order to prevent the formation of unpleasant
odors inside the washing tank.
•
Fill the rinse-aid dispenser
•
Shut off the water supply tap
Before starting the dishwasher after prolonged disuse
•
Check that there are no deposits of sludge or rust inside the water pipe: if there
are, allow the water to run from the water supply tap for a few minutes.
•
Plug the power cord
•
Reconnect the water intake hose and open the tap again
5.6
Troubleshooting minor problems
In some cases it is possible to remedy minor problems by referring to the follow-
ing instructions:
If the program fails to start, check that:
•
the dishwasher is connected to the electrical power supply;
•
there is no power failure;
•
the water tap is open;
•
the dishwasher door is properly closed.
If water remains inside the dishwasher, check that:
•
the drain hose is not kinked
•
the drain siphon is not obstructed;
•
the dishwasher fi lters are not clogged.
If the dishes do not come out clean, check that:
•
the correct amount of detergent has been added;
•
there is regenerating salt inside the special container;
•
the dishes are being loaded correctly;
•
the selected program is suitable for the dish types and their degree of soiling;
•
all the fi lters are clean and positioned correctly;
•
the spray arm nozzles are not obstructed;
•
there is no object obstructing the rotation of the spray arms.
40
USER INSTRUCTIONS
twice in succession.
cord from the socket.
.
.
back into the socket.
.
Rev 0.0
Hide quick links:
Advertisement
Table of Contents
