Adding Rinse Aid - AEG FAVORIT 43470 I User Information

Operating instructions

Adding rinse aid

With rinse aid the rinsing water drains away better and so you get
smear-free, gleaming dishes and clear glasses.
Only use special rinse aid for dishwashers and no other liquid
detergents.
If you don't use 3 in 1 detergent add rinse aid:
- Before using the dishwasher for the first time.
- When the indicator for rinse aid is illuminated on the control panel.
1. Open the door. The rinse aid
compartment is located on the
inside of the dishwasher door.
2. Press the release button on the rinse
aid compartment.
3. Open the cover.
4. Pour rinse aid in slowly right up
to the broken "max" line;
this corresponds to a volume of
approx. 140 ml when full.
5. Press the lid shut until it clicks
into place.
6. Wipe up any spilt rinse aid with a
cloth. Otherwise too much foam
will be formed when rinsing.
Setting the amount of rinse
aid required
Only change the amount dispensed, if smears, milky spots or dried on
water spots can be seen on glasses and dishes. (See section "If wash
results are not satisfactory"). The dosage can be set from 1-6. The
dosage is set to "4" in the factory.
10
BR17
BR14