Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for AEG F45700VI0P
Summary of Contents for AEG F45700VI0P
- Page 1 User Manual F45700VI0P Dishwasher...
-
Page 2: Table Of Contents
13. TECHNICAL INFORMATION..................20 FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it. -
Page 3: Safety Information
ENGLISH SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damages that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference. -
Page 4: Safety Instructions
Put knives and cutlery with sharp points in the cutlery • basket with the points down or in a horizontal position. Do not keep the appliance door open without • supervision to prevent to fall on it. Before any maintenance operation, deactivate the •... -
Page 5: Product Description
ENGLISH • Ensure that there are no visible water completed. There can be detergent leaks during and after the first use of on the dishes. the appliance. • The appliance can release hot steam • If the water inlet hose is damaged, if you open the door while a immediately close the water tap and programme operates. -
Page 6: Control Panel
Upper basket Cutlery drawer 4. CONTROL PANEL On/off button Indicators Programme buttons Delay button 4.1 Indicators Indicator Description End indicator. XtraDry indicator. Rinse aid indicator. It is always off while the programme operates. Salt indicator. It is always off while the programme operates. -
Page 7: Settings
ENGLISH Programme Degree of soil Programme phases Options Type of load • Normal or light • Wash 45 °C • XtraDry soil • Rinses • Delicate crockery • Dry and glassware • Fresh soil • Wash 60 °C • XtraDry •... -
Page 8: The Water Softener
6.2 The water softener • The activation or deactivation of the rinse aid empty notification. The water softener removes minerals • The level of rinse aid according to the from the water supply, which would have required dosage. a detrimental effect on the washing These settings will be saved until you results and on the appliance. - Page 9 ENGLISH How to set the water softener • The indicators level go off. • The indicator continues to The appliance must be in programme flash. selection mode. • The end indicator starts to flash. 1. To enter the user mode, press and The number of flashes indicates the current setting: e.g.
-
Page 10: Options
How to activate the acoustic 2. Press signal for the end of • The indicators programme go off. The appliance must be in programme • The indicator continues to selection mode. flash. • The end indicator indicates the 1. To enter the user mode, press and... -
Page 11: Daily Use
ENGLISH 8.2 How to fill the rinse aid inside the appliance. Do not use detergent and do not load the dispenser baskets. When you start a programme, the appliance can take up to 5 minutes to recharge the resin in the water softener. It seems that the appliance is not working. -
Page 12: Starting A Programme
2. Press the on/off button to activate • 5 minutes after the completion of the the appliance. programme. Make sure that the appliance is in • After 5 minutes if the programme has programme selection mode. not started. • If the salt indicator is on, fill the Starting a programme salt container. -
Page 13: Hints And Tips
ENGLISH Cancelling the delay start while Make sure that there is detergent in the detergent dispenser before you start a the countdown operates new programme. When you cancel the delay start you End of programme have to set the programme and options again. -
Page 14: Care And Cleaning
2. Make sure that the salt and rinse aid • Make sure that the spray arms can containers are full. move freely before you start a 3. Start the shortest programme with a programme. rinsing phase. Do not add detergent 10.5 Before starting a... -
Page 15: Cleaning The Upper Spray
ENGLISH 1. Turn the filter (B) counterclockwise and remove it. 7. Reassemble the filters (B) and (C). 8. Put back the filter (B) in the flat filter (A). Turn it clockwise until it locks. 2. Remove the filter (C) out of filter (B). 3. -
Page 16: Troubleshooting
11.3 External cleaning • Clean the appliance with a moist soft cloth. • Only use neutral detergents. • Do not use abrasive products, abrasive cleaning pads or solvents. 11.4 Internal cleaning • Carefully clean the appliance, including the rubber gasket of the door, with a soft damp cloth. - Page 17 ENGLISH The majority of problems that can WARNING! occur can be solved without the need Repairs not properly done to contact an Authorised Service may result in serious risk to Centre. the safety of the user. Any repairs must be performed by qualified personnel.
- Page 18 Problem and alarm code Possible cause and solution The program lasts too long. • If the delayed start option is set, cancel the de- lay setting or wait for the end of the count- down. Small leak from the appliance door.
- Page 19 ENGLISH Problem Possible cause and solution Poor drying results. • Tableware has been left for too long inside a closed appliance. • There is no rinse aid or the dosage of rinse aid is not enough. Set the rinse aid dispenser to a higher level. •...
-
Page 20: Technical Information
Problem Possible cause and solution Limescale deposits on the ta- • The level of salt is low, check the refill indicator. bleware, on the tub and on • The cap of the salt container is loose. • Your tap water is hard. Refer to "The water softener". - Page 21 ENGLISH along with the general house hold waste. at local authority or, commercial Dispose all electrical goods via recycling centres. applicable local authority collections, or...
- Page 22 www.aeg.com...
- Page 23 ENGLISH...
- Page 24 www.aeg.com/shop...