360° Camera - Mercedes-Benz COMAND Supplement Manual

360° camera
46
Exterior lighting switch-off delay time
If you switch on the
Delayed Switch-off Delayed Switch-off
lighting is switched on for a short time after the
engine is switched off. The light switch must be
set to Ã; see the vehicle Operator's Manual.
The exterior lighting remains on for 60 seconds
after the engine is switched off. If you close all
the doors and the tailgate, the exterior lighting
switches off after the set time.
Call up Vehicle Settings Vehicle Settings
X
To select Exterior Lighting Delayed Exterior Lighting Delayed
X
Switch-off Switch-off: turn and press the controller.
The setting element is active.
To change the delayed switch-off time: turn
X
and press the controller.
360° camera
General notes
The 360° camera covers the immediate sur-
roundings of the vehicle and assists you, for
instance when parking or at exits with reduced
visibility.
The 360° camera is only an aid. It is not a
replacement for your attention to your immedi-
ate surroundings. You are always responsible
for safe maneuvering and parking. Make sure
that no persons or animals are in the maneu-
vering range.
For more information on the 360° camera see
the vehicle Operator's Manual.
Displaying the 360° camera image
The 360° camera image can be displayed if:
your vehicle is equipped with a 360° camera
R
the 360° Camera 360° Camera function is switched on (see
R
the vehicle Operator's Manual)
Press the Ø button.
X
or
Press Vehicle Vehicle in the main function bar.
X
The vehicle menu is displayed.
To select 360° 360° Camera Camera: turn and press the
X
controller.
The 360° camera image appears in split
screen mode.
Exterior Lighting Exterior Lighting
function, the exterior
( page 44).
Y
You will see the previous view on the display if,
when the function is switched on:
you turn the SmartKey to position 1 in the
R
ignition lock
you select transmission position P
R
when you are driving at moderate speeds
R
Switching the display off manually
To select &: slide 6 and press the con-
X
troller.
Switching the display on automatically
You can automatically switch the 360° Cam-
X
era display using reverse gear (
Switching automatic mode of the
360° camera on/off
This function activates the 360° camera when
reverse gear is engaged.
Press the Ø button.
X
or
Press Vehicle Vehicle in the main function bar.
X
The vehicle menu is displayed.
To switch to the menu bar:slide 6 the
X
controller.
To select System Settings System Settings: turn and press
X
the controller.
To select 360° Camera 360° Camera: turn and press the
X
controller.
The menu 360° Camera 360° Camera
Select Activation by R gear Activation by R
X
The function is switched on O or off ª,
depending on the previous status.
Opening the camera cover for clean-
ing
To select Open Camera Cover Open Camera Cover
X
camera menu: turn the controller and press to
confirm.
The Please Wait... Please Wait... message appears for
approximately three seconds.
The camera cover opens.
The camera cover closes automatically if:
the ignition is switched off
R
the vehicle exceeds a moderate speed
R
page 46).
Y
appears.
gear.
in the 360°