Character Entry (Navigation) - Mercedes-Benz COMAND Supplement Manual

¬
R
Confirms an entry
&
R
Cancels input
S
R
Inserts a paragraph

Character entry (navigation)

Character entry options
You can enter characters using the controller or
the touchpad. With the controller, you enter
characters using a character bar. To enter using
the touchpad, draw the character in the entry
field. The multimedia system supports this using
a handwriting recognition function.
Entering characters using the charac-
ter bar
Characters STUT STUT entered by the user
:
(orange)
; Characters automatically added by the mul-
timedia system EBÜLL EBÜLL
Switches to keyword search
=
? Characters not currently available
A Currently selected character
Characters currently available
B
Character bar
C
The example shows the address entry
( page 57).
Y
To enter a character: turn, slide 6 or 5
X
and press the controller.
Selected character : is entered in the upper
line. The multimedia system adds the missing
characters and shows the entry that best
matches the current input.
Character entry (navigation)
The characters are available B or not ?,
depending on the characters already entered
and the data stored in the digital map.
The G symbol indicates that an entry exists
more than once.
To delete a character: slide 6 and turn the
X
controller, then press it after selecting
.
To delete an entire entry: slide 6 and turn
X
the controller, then after selecting
press and hold down the controller until the
entire entry is deleted.
To switch to keyword search: slide 6 and
X
turn the controller, then press it after select-
ing = ( page 59).
Y
To confirm an entry: slide 6 and turn the
X
controller, then press it after selecting¬.
or
Slide 5 the controller repeatedly until the
X
character bar disappears.
The location selection list appears. The selec-
ted entry is highlighted.
Cursor
:
Entry line
;
The example shows the character entry when
you save a destination as a navigable contact in
the address book ( page 58).
Y
To select an input line: slide 6 and turn
X
the controller, then press it after selecting 4
or 5.
or
Slide 5 the controller repeatedly until the
X
character bar disappears.
Turn and press the controller.
X
To move the cursor: select the input line.
X
Slide 6 and turn the controller, then press it
X
after selecting 2 or 3.
31