Oil Pump - Husqvarna 340 Workshop Manual

Repair instructions
Oil pump – removal
1
Empty the oil tank.
2
Remove the clutch cover, cylinder cover, guide bar
and chain. The chain brake must be disengaged
first.
3
Disconnect the HT lead.
Remove the spark plug and fit piston stop 502 54
15-01 in its place.
28
– English
4
Unbolt the clutch clockwise using tool
502 54 16-01.
5
C
Loosen and remove the clutch drum (A), needle
bearing (B) and pump drive wheel (C).
6
Remove the chain guide plate by unscrewing 1 or 2
bolts, depending on the model.
B
A