Centrifugal Clutch - Husqvarna 340 Workshop Manual

Repair instructions
Centrifugal clutch – removal
1
Remove the clutch cover, cylinder cover, guide bar
and chain. The chain brake must be disengaged
first.
2
Disconnect the HT lead. Remove the spark plug
and fit piston stop 502 54 15-01 in its place.
26
– English
3
Unbolt the clutch using tool 502 54 16-01 and a
number 19 socket. Turn the clutch clockwise to
remove it.
4
Remove the clutch shoes and hub.
5
Prise out the clutch springs with a screwdriver.
NOTE!
Handle the clutch springs carefully. If they
are opened up too much they could
damage the saw.