Yale Real Living YRL210 Installation And Programming Instructions page 31

Installing the ZigBee Module
IMPORTANT: the batteries
to removing and/or inserting the network module:
• Remove battery cover.
• Remove batteries.
• Remove and/or insert network module.
• Reinstall batteries.
• Replace cover.
Enrolling/Unenrolling the Network Module:
It is recommended that lock is programmed through the centralized user interface (
hand-held device) to ensure communication between the lock and the controller unit. The
network controller first needs to be in enrollment or exclusion mode for the lock to be
enrolled or unenrolled from network.
To Enroll the Module:
• Enter the 4-8 digit Master
• Press the key followed by the
• Press the key followed by the
To Unenroll the Module:
• Enter the 4-8 digit Master
• Press the key followed by the
• Press the key followed by the
Yale Real Living ZigBee Module
®
Installation and Programming Instructions
®
must be removed prior
PIN code followed by the
key.
key.
PIN code followed by the
key.
key.
® ®
key.
key.
P/N AYR 200- - ZB INSTAL FUL
PC or
- Rev F