Using Solo In Stand-Alone Mode; Digital Answer Phone - Pace 56 Solo Manual

Using Solo in Stand-alone Mode

Digital Answer Phone

Your Solo provides all the features of an advanced digital
answer phone. Its operation is totally independent and does
not require your computer to be active.
To switch the answer phone ON:
Press the ANS button.
• The ANS button will glow,
accompanied by the
announcement:
"Answering machine record".
• The answer phone will now
respond to any incoming call after the third ring.
Outgoing message: A standard outgoing message is
pre-recorded for your use. If you wish to hear this message
or re-record it, refer to page 9.
Note: When you switch your Solo on for the very first time,
the answer phone will automatically switch on.
To stop your Solo if you also answer a call:
Press the key twice on your phone.
*
Use this feature if you pick up the call just after your Solo
has started to answer. Your Solo will immediately stop
answering the call but remain ready for the next.
8 Using Solo in Stand-alone Mode
To switch the answer phone OFF:
Press the ANS button.
• The ANS button will darken,
accompanied by the
announcement:
"Answering machine off".
To listen to received messages:
Press the flashing
ANSWER PHONE button to
hear received messages.
• Your Solo will announce the
number of received messages
and then play each one with
the time and date that each message was taken.
+ —
• Use the and buttons to adjust the speaker volume.
Options available as messages are playing:
• To skip back or forward between messages:
Press the or
• To delete a single message:
Press the ERASE button as the message plays.
• To stop playing messages:
Press the ANSWER PHONE button.
Note: If your phone line has a caller identification feature,
you can use the CALLER ID button to hear the phone
number of each caller. See page 9 for details.
buttons.