Installing Your Solo; To Connect Your Solo - Pace 56 Solo Manual

Installing your Solo

To connect your Solo

1 Position your Solo near to your computer and within
reach of a power outlet and a phone socket.
2 With your computer switched off, use the modem cable
supplied to connect your Solo to the computer:
• Attach the smaller, rounded connector to the port
marked
• Attach the larger, rectangular connector to the port
marked
SERIAL PORT
4 Installing your Solo
at the rear of your computer.
at the rear of your Solo.
3 Your Solo is supplied with a telephone cable to connect
it to a standard phone socket. In addition, a doubler
plug is provided so that you can use your telephone in
conjunction with the Solo.
Insert the doubler plug into the telephone wall socket.
4 Using the Solo telephone cable, attach the larger of the
two connectors to either of the doubler plug sockets.
Attach the lead from your phone to the other doubler
plug socket.
5 Attach the smaller connector on the Solo phone cable
to the port marked
LINE/PHONE
at the rear of your Solo.