Answer Phone Remote Control - Pace 56 Solo Manual

Answer Phone Remote Control

To provide full flexibility, the answer phone offers a remote
control feature so that you may access your Solo whilst in
another location. This is achieved using a touch-tone phone
and first requires you to set a PIN code for security.
To set a PIN code:
Press the FAX, SPEAKER PHONE and ANSWER PHONE
buttons simultaneously.
• The three buttons will glow.
• Enter a four digit PIN code using the number buttons
explained on the fold-out flap at the front of this booklet.
• After the fourth digit is entered, your Solo will announce
the four numbers in confirmation.
To gain remote control access:
1 Using a touch-tone phone, call the answer phone
(the answer phone must be switched on).
2 When the call is answered, press the # key on the
telephone. You will be prompted to enter your PIN code.
3 Enter your PIN code using the telephone keypad. After
the code is entered correctly, your Solo will summarise
its message status and settings.
4 Press the key to hear the menu of functions or select
*
one of the functions directly by pressing the appropriate
telephone key:
KEY FUNCTION
# Enter remote control mode.
Listen to a summary of the remote control commands.
*
1 Serves two functions:
• Press while listening to a message to delete the message.
• Press after selecting option 2 (listen to the outgoing
message) to re-record the outgoing message.
2 Listen to the outgoing message. If re-recording the outgoing
message, press this key again to stop recording and play the
new outgoing message.
3 Switch the answer phone off.
4 Delete all received voice messages.
5
Quit and hang-up.
6 Listen to the call details list.
7 (While listening to messages) Skip to previous received message.
8 Listen to received messages.
9 (While listening to essages) Skip to next received message.
0 Change the Follow Me contact number. Listen to the Follow
Me settings summary and then enter the new number (wait
for each entered digit to be announced before entering the
next). Press when the number is complete.
*
To end your remote control session:
Press the 5 key on the telephone and hang up; or just hang up.
To activate the answer phone remotely if it is off:
Phone your number and let it ring 20 times.
Using Solo in Stand-alone Mode 11