Pace 56 Solo Manual page 14

To switch Follow Me ON:
Press the FAX and
CALLER ID buttons
simultaneously.
• Your Solo will
summarise the
Follow Me settings
and the CALLER ID button will glow.
• When the Solo receives a call, the Follow Me feature
will call you at the designated time(s), making up to
two attempts to make contact.
• When you answer the call, you will hear the Follow Me
message and have the option to use the answer phone
remote control facility to hear the received message(s).
Note: If your Solo announces 'Follow Me off', rather than
switching on as discussed above, then there may be a
problem with one or more of the settings (check that your
PIN code is entered correctly).
14 Using Solo in Stand-alone Mode
To use remote control to hear your messages:
1 Press the # key on the telephone keypad.
2 Enter your PIN code.
3 Press the 8 key.
4 When you have listened to the messages, either invoke
other remote control commands or hang up.
• For further details of the remote control commands,
please refer to page 11.
Once you have listened to the received messages, Follow
Me will not call again until new messages are received.
However, if you do not listen to, or delete the messages,
the Follow Me feature will call you at the next permitted
time with the same message(s).