Date And Time - Pace 56 Solo Manual

Date and Time

Your Solo has an internal clock which is used to record the
time that each message is received.
If your phone line has a caller identification service, then
the internal clock will be updated automatically via the
phone network every time a call is received. It will also be
updated each time you open the supplied FotoMac
software on your computer.
The internal clock operates whenever power is applied to
your Solo. If the power is switched off, the internal clock
freezes and retains the current date and time until power is
restored, whereupon it continues from where it froze.
To hear the date and time settings:
Press the FAX
and ANN keys
simultaneously.
• The FAX
and ANS
buttons will
glow while you hear the
current date and time settings held
within your Solo.
16 Using Solo in Stand-alone Mode
To manually re-configure your Solo
date and time settings:
Press the FAX and ANS keys simultaneously.
• The FAX and ANS buttons will glow.
You now need to enter a ten digit number
which breaks down as follows:
(use the Number Buttons explained on the
fold-out flap at the front of this booklet)
After the tenth digit is entered, your Solo will announce the
date and time as confirmation.
For example: the number shown
here: 14 02 99 17 24 would set the
date: Sunday 14th February 1999
and the time: 5:24pm.