Pace 56 Solo Manual page 10

To speak to the caller:
Press the SPEAKER PHONE
button.
• You can now speak hands
free, using the built-in
Solo microphone and
speaker. Alternatively,
pick-up your normal
phone handset if privacy
is required.
To stop the answer phone recording your call:
Press the key twice on your phone.
*
To hang-up:
Press the SPEAKER PHONE button.
To switch Call Monitoring OFF:
Press the FAX and
SPEAKER PHONE
buttons.
• The SPEAKER
PHONE button will
darken.
• With Call Monitoring
switched off, you will
not hear the incoming messages
as they are left by callers.
10 Using Solo in Stand-alone Mode
To hear call details:
Press the flashing CALLER ID
button.
• Your Solo will announce
the number of calls and
then give each phone
number* preceded by the
time that each was
received.
Note: The correct time announcements for call details
will depend on your Solo internal clock being set
correctly. See page 16 for details.
Options available as calls are being announced:
• To skip back or forward between calls:
Press the or
To delete all call details:
(cannot be done while listening to call details)
Press the ERASE and
CALLER ID buttons
simultaneously.
• The CALLER ID
button will
darken.
*
Without a subscription to the caller identification service
operated by your telephone company, the Caller ID feature will
announce only the time of each received call.
buttons.