Adjusting the set speed
To change the set speed, operate the lever until the desired set speed is obtained.
Increases the speed
1
Decreases the speed
2
Fine adjustment: Momentarily move the
lever in the desired direction.
Large adjustment: Hold the lever in the
desired direction.
The set speed will be increased or decreased as follows:
Fine adjustment: By 1 mph (1.6 km/h)
operated.
Large adjustment: The set speed can be increased or decreased continually until the
lever is released.
*
1
: When the set speed is shown in "MPH"
*
2
: When the set speed is shown in "km/h"
Canceling and resuming the constant speed control
Pulling the lever toward you cancels
1
the constant speed control.
The speed setting is also canceled when
the brakes are applied.
Pushing the lever up resumes the
2
constant speed control.
Resuming is available when the vehicle
speed is more than approximately 25
mph (40 km/h).
Cruise control can be set when
■
The shift lever is in D or range 4 or higher of S has been selected.
●
Vehicle speed is above approximately 25 mph (40 km/h).
●
Accelerating after setting the vehicle speed
■
The vehicle can be accelerated normally. After acceleration, the set speed resumes.
●
Even without canceling the cruise control, the set speed can be increased by first accel-
●
erating the vehicle to the desired speed and then pushing the lever down to set the new
speed.
ES300h_OM_OM33C75U_(U)
4-5. Using the driving support systems
*
*
1
or 1 km/h (0.6 mph)
239
2
each time the lever is
4