While pressing the recalled but-
4
ton, press and hold the door lock
switch (either lock or unlock) until
the buzzer sounds.
If the button could not be registered,
the buzzer sounds continuously for
approximately 3 seconds.
Recall procedure
■
Carry the electronic key that has been registered to the driving position,
1
and then unlock and open the driver's door using the smart access system
with push-button start or wireless remote control.
The driving position will move to the recorded position (not including the steering
wheel). However, the seat will move to a position slightly behind the recorded posi-
tion in order to make entering the vehicle easier.
If the driving position is in a position that has already been recorded, the seat and
outside rear view mirrors will not move.
Turn the power switch to ACCESSORY mode or ON mode, or fasten a
2
seat belt.
The seat and steering wheel will move to the recorded position.
Cancelation procedure
■
Carry only the key you want to cancel and then close the driver's door.
If 2 or more keys are in the vehicle, the driving position cannot be canceled
properly.
Turn the power switch to ON mode.
1
While pressing the "SET" button, press and hold the door lock switch
2
(either lock or unlock) until the buzzer sounds twice.
If the button could not be canceled, the buzzer sounds continuously for approxi-
mately 3 seconds.
Recalling the driving position using the memory recall function
■
Different driving positions can be registered for each electronic key. Therefore, the
●
driving position that is recalled may be different depending on the key being carried.
If a door other than the driver's door is unlocked with the smart access system with
●
push-button start, the driving position cannot be recalled. In this case, press the driving
position button which has been set.
Customization
■
The unlock door settings of the memory recall function can be customized.
(Customizable features: →P. 562)
ES300h_OM_OM33C75U_(U)
3-3. Adjusting the seats
133
3