Advanced Settings - Extech Instruments SD910 User Manual

Advanced Settings
The SET function is used to:

Format the SD memory card

Set the date and time

Set the sampling time

Set the beeper sound ON/OFF

Set the SD card Decimal character

Set the RS232 data output ON/OFF

Set the voltage range to 300mV or 3000mV
1. Press and Hold the SET button for >2 seconds to enter the setting mode.
The first function (Sd F) will appear in the display. Press the SET button to step through the
seven functions. Use the ▲ and ▼ buttons to adjust the selected function. Use the "LOG"
button to step through fields within a function. In the SET mode, if no button is pressed
within 5 seconds, the logger will revert back to the standard mode.
2. Sd F – Format the SD card.
Press the ▲ button to select yES or no. For yES, press the
appear, press the
will display a flashing yEs and ESC while the memory is being erased and formatted.
3. dAtE – Set the date and time.
Press the ▲ or ▼ buttons to adjust the selected (blinking) field. Press the
store the value and to step through the various fields (Year, Month, Day, Hour, Minute,
Second)
4. SP‐t – Set the sample rate.
Press the ▲ button to select the desired sample rate and press Enter to store the selection.
The selections are: 5, 10, 30, 60, 120, 300, 600 seconds and AUTO. In AUTO, the data will be
stored every time there is a change of >10 digits.
5. bEEP ‐ Set the beeper ON or OFF.
Press the ▲ button to select ON or OFF and press
6. dEC ‐ Set the SD card Decimal character.
Press the ▲ button to select USA (decimal) or Euro (comma) and press
selection.
7. rS232 ‐ Set the RS232 data output ON/OFF.
Press the ▲ button to select ON or off and press
8. Rng – Set the voltage range
Press the ▲ button to select either to 3000mV or the 300.0mV range and press
the selection.
9. ESC – Exit the setting mode.
Press the SET button to return to normal operation.
key again to format the card and erase all existing data. The screen
to store the selection.
to store the selection.
7
button. When yES and Ent
button to
to store the
SD910‐en‐GB_V1.2 9/16
to store