3: Pairing The Accessory - FIBARO FGBHMS-001 Operating Manual

#3: Pairing the accessory

1. Open the Settings app on your iOS device.
2. Go to the Bluetooth® section, and turn the Bluetooth® on.
3. Place the accessory next to your iOS device.
4. Open a HomeKit compatible app of your choosing on your iOS
device.
5. Open pairing window in your HomeKit app to detect available
accessories.
6. Choose Motion Sensor you wish to pair.
7. You can identify it - Motion Sensor will triple blink blue 3 times.
8. Find HomeKit Setup Code on the last page of Quick Start Guide
included in the box that looks like this:
9. Start pairing with your HomeKit app.
10. Point your iOS device's camera at the Setup Code to scan it or en-
ter the Setup Code manually.
11. if entered Setup Code is valid, the device will complete the setup
process.
12. Follow instructions displayed in the application.
XXX-XX-XXX
i
NOTE
Remember to keep
your HomeKit Setup
Code in safe place. You
may need it in case of
re-pairing.
PAiRinG THe ACCeSSORY
5