Optional Components; Unpacking The Board - Measurement Computing PCI-DAS4020/12 User Manual

PCI-DAS4020/12 User's Guide

Optional components

If you ordered any of the following products with your board, they should be included with your
shipment.
Universal Library
Universal Library™ Data Acquisition and Control Programming Tools (also includes the Insta Cal
utility, the Universal Library User's Guide , and the Universal Library Function Reference )
Cables
C40FF-x
Signal termination and conditioning accessories
MCC provides signal termination products for use with the PCI-DAS4020/12. Refer to the
signal termination and
products.

Unpacking the board

The PCI-DAS4020/12 board is shipped in an antistatic container to prevent damage by an electrostatic
discharge. To avoid such damage, perform the following procedure when unpacking and handling your
board:
1. Before opening the antistatic container, ground yourself with a wrist-grounding strap or by holding
onto a grounded object (such as the computer chassis).
2. Touch the antistatic container to the computer chassis before removing the board from the container.
3. Remove the board from the container. Never touch the exposed pins or circuit connections on the
board.
If your PCI-DAS4020/12 is damaged, notify Measurement Computing Corporation immediately by
phone, fax, or e-mail. For international customers, contact your local distributor where you purchased the
PCI-DAS4020/12.
C40-37F-x
conditioning" section on page 2-8 for a complete list of compatible accessory
BP40-37F-x
2-2
Installing the PCI-DAS4020/12
"Field wiring,