Toro 37797 Operator's Manual page 22

Figure 45
2. Turn the base of the bulb counterclockwise until
it stops (Figure 46).
Figure 46
3. Remove the bulb straight out from the back of
the headlight (Figure
Figure 47
4. Insert a new bulb into the back of the headlight
(Figure 48).
Figure 48
5. Turn the base of the bulb clockwise until it is
snug (Figure 49).
47).
g001037
6. Insert the wire connector straight into the back of
the headlight until it is securely in place
50).
g001033
g001034
g001035
22
Figure 49
Figure 50
g001036
(Figure
g006590