Remote Start Feature Programming - Marksman X6 Installation Manual

Remote Start Feature Programming (Group 1)
O e n
Button One LED Pulse
(Default Setting)
(Default Setting)
Turbo Timer Control
Function is Off.
The keyless entry system can not
lock the doors while the engine is
running.
+
Four Chirps
Four LED Flashes
Turbo Timer Control is Active
Press the (
removing the ignition key to activate
the 3 minute Turbo timer control.
The keyless entry system can lock
the doors while the engine is
running
Step 4:
Exit Programming
C i h p r
The vehicle has an aftermarket
turbo timer installed. The keyless
entry system can lock the doors
while the vehicle is running.
+ ) buttons before Press the (
removing the ignition key to
activate the 5 minute Turbo timer
control. The keyless entry system
can lock the doors while the
engine is running
Turn On the Ignition
3 long chirps and 3 flashes of the parking lights will confirm exit of the
programming mode.
Note: Waiting 15 seconds after the last command will also cause the
system to automatically exit the programming mode.
(continued)
T w o C h r i s p
Two LED Pulses
Five Chirps
Four LED Flashes
Turbo Timer Control is Active
+ ) buttons before
T r h e e C h r i s p
Three LED Pulses
Turbo Timer Control is Active
Press the ( + ) buttons before
removing the ignition key to activate
the 1 minute Turbo timer control. The
keyless entry system can lock the
doors while the engine is running
Notice:
The Turbo Timer
feature will not
operate when using
the 1 button
transmitter
21