Plug-In Harness Information; Wiring - Marksman X6 Installation Manual

Wiring

(continued)
HC4: White 9 Pin Accessory Harness
Passkey II Passive Anti-Theft Bypass
White 9-Pin
Mini Connector
Red/White Wire : Channel 3 (Trunk Release) Output
The Red/White will become grounded for 1 second when activated by the remote transmitter. The current
capacity of this wire is 200mA and may require an additional relay to operate properly.
Plug-In Harnesses
P2 Valet Switch
Pink Wire
87
87A
86
30
Red/White
Wire
87
86
30
White
9-Pin Mini
(Relay Not Supplied)
Connector
(continued)
Trucks: Red/White or Cars: White
Trucks: Orange/Black or Cars: Black
Yellow
Resistor
85
To Vehicle's Ignition Wire
Output to Power
Trunk Switch
To Constant +12 Volts
85
Input to Relay (+ or -)
15