Troubleshooting Windows Platforms - Alcatel-Lucent 5620 Troubleshooting Manual

5
6
8.2

Troubleshooting Windows platforms

Many of the commands in section
Troubleshooting Guide can also be performed on a Windows platform PC. In all
cases, the commands are run from the DOS command line. As well, you can check
PC performance and running process details using the Task Manager. Some of the
commands include:
•
ping
•
tracert
•
taskmgr (Task Manager)
•
ipconfig
The Windows Task Manager provides details about programs and processes that run
on the PC. If you are connected to a LAN, you can also view network status and
check network performance. Depending on the NOC work environment and shared
computer usage policy, you can also view additional information about other users.
Use your PC and Windows operating procedure manuals, or check with the IT
department, for information about stopping programs or processes, starting
programs, and viewing the dynamic display of computer performance using the Task
Manager.
Alcatel-Lucent 5620 Service Aware Manager, Release 6.1 R3
3HE 04244 AAAB Ed. 01
/swapdirectory/swapfilename - - swap - no -
where
swapdirectory is the name of the directory where you created the new swap file
swapfilename is the name of the swap file you created
iii Save the changes and quit the text editor.
To allocate the emergency swap file, type:
swap -a /swapdirectory/swapfilename ↵
where
swapdirectory is the name of the directory where you created the new swap file
swapfilename is the name of the swap file you created
Verify that the swap file is allocated by typing:
swap -l ↵
and
swap -s ↵
Several lines are displayed. The format of the last line is:
total: 52108k bytes allocated + 24944k reserved = 77052k used,
93992k available
Troubleshooting Guide
8 — Troubleshooting Solaris and Windows platforms
8.1 and throughout the rest of the 5620 SAM
November 2008 8-9