Miele WMV 960 WPS Operating Instructions Manual page 49

 = Low water level
 = Medium water level
 = High water level

= Intensive rhythm

= Normal rhythm
 = Sensitive rhythm

= Ultra sensitive rhythm

= Handwash rhythm

= Carried out
– = Not carried out
The washing machine has fully elec-
tronic controls with automatic load re-
cognition. It takes in the right amount of
water required for the programme de-
pending on the amount of laundry and
its absorbency rate.
The programme sequences shown in
the chart are based on the standard
programme with a full load.
The washing machine programme se-
quence display shows which stage of
the programme has been reached.
Programme sequence
Special features in the pro-
gramme sequence
Anti-crease:
At the end of the programme the drum
continues to turn at intervals for up to
30 minutes to help prevent creasing.
Exception: There is no anti-crease
phase in the Woollens programme.
The door can be opened at any time
during the anti-crease phase.
1)
A second rinse is carried out when a
temperature of 60°C or above is se-
lected. A third rinse is carried out
when a temperature below 60°C is se-
lected.
2)
An additional rinse is carried out if:
– there is too much foam in the drum
– a spin speed lower than 700 rpm has
been selected
– the spin speed has been deselected
3)
An additional rinse is carried out if:
– the Extra rinse option is selected.
4)
Run-up to spin: A run-up to spin is
carried out before the wash process
begins to deflate down filled items.
Subsequent water intake for the main
wash is through compartment .
49