Echo DHC-30 Operator's Manual page 14

14
1. OPERATOR'S MANUAL - The Operator's Manual contains specifications and information for operation,
starting, stopping, maintenance, storage and assembly specific to this product. Read and understand this
manual before operation. Keep manual in a safe location for future reference, i.e., operation, maintenance,
storage and specifications.
2. MOTOR AND GEAR BOXHOUSING-
3．REAR HANDLE GRIP - Contains the Rear Trigger Switch and Circuit Breaker.
4．FRONT HANDLE GUARD - Guard protects hand from the blades.
5．FRONT HANDLE GRIP - Contains the Front Trigger Switch.
6．FRONT TRIGGER LEVER – Trigger Switch in the Front Handle Grip is controlled by Front Trigger Lever.
7．REAR TRIGGER LEVER - Trigger Switch in the Rear Handle Grip is controlled by Rear Trigger Lever.
8．CIRCUIT BREAKER - Automatically stops unit when blade stops because of an excessive load. Safely
remove cause of problem and reset circuit breaker by pushing button.
9．BLADES - Double reciprocating blades mounted to a blade support bar. The DHC-30 has single sided
blades, meaning they are capable of cutting on one side of the blade.
10．BATTERY AND KNAPSACK - Sealed, 12 V
11．BATTERY CONNECTOR AND CORD-
12．HARNESS-
13．CHARGER-
14．CAUTION LABEL-
15．PLUG CONVERTER- (Use whenever necessary.)
16．THROTTLE TRIGGER LOCKOUT –This must be depressed before Throttle Trigger can be activated.
※ When two switches of rear trigger switch and front trigger switch are depressed all at once blades
will move at full cutting speed.
battery(DHCA-30), in canvas knapsack.