Table of Contents
Advertisement
20
GREASING GEAR BOX
Level2.
Tools Required: Grease Gun, Clean Rag.
Parts Required: Lithium Base Grease.
IMPORTANT: Carefully pump grease in fitting. DO NOT force
grease. Too much pressure will force grease past seal and
cause damage. Apply 2 - 3 pumps of grease every 10 hours
of operation
.
pump：about 0.5ｇ → 2 - 3 pumps：about 1ｇ～1.5ｇ
（1
1.Clean dirt from grease fitting (H).
2.Carefully pump grease into fitting (H) until grease comes out
overflow hole at end of gear box.
SHARPENING BLADES
LEVEL3.
Return unit to your ECHO Agency (ECHO Service Dealer) for proper blade sharpening
STORAGE
Long Term Storage (over 30 days)
IMPORTANT:
Always
maintenance
when-ever storing unit for 30 days or longer.
1．Remove any grease, oil, dirt or debris from unit.
2．Perform any periodic maintenance required, including tightening
screws and nuts.
3．Place thin layer of oil on blade to prevent rust.
4．Store unit in dry, dust free place, out of reach of children and away
from any flammable substance.
5．Disconnect battery from unit. Charge battery until indicator light
goes out or blinks (3 - 3.5 hours). Do not charge battery for more
than 24 hours. Place in upright position.
perform
the
following
）
protective
H
Advertisement
Table of Contents
