Pull-Up Menu; Device Connections - Returnstar Interactive Tech IQTOUCH User Manual

Pull-up Menu

Pull-up fingerfrom the bottom area of screento show pull-up menu.
Menu instructions
Back: Back to the Main interface.
Home: Enter the Android System.
Task: Enter the tasks interface to display all the tasks youopened.
Input: Display the input source interface.
Menu: Display the system settings interface
Vol-/Vol+: Adjust the devicesound
Bright-/Bright+: Adjust the device brightness
Wpanel: Enter the annotation functions
Scomme:Start the annotation.
Scshot: Capture the screen.
User: Start the annotation.

Device Connections

Connect external computer to touch TV
1) Connect the computerHDMI/VGA port to IQTouch corresponding ports via HDMI/VGA cable.
2) Connect computer USB port to Touch pane's USB port via USB cable.
3) Plug-in the power cord and start the IQTouch
4) Press "Input" button to select signal source (external computer).
Note: If the VGA/DMI is connected to the front port，TOUCH_USB must follow the front port；if to
the back port, the same with TOUCH-USB. Otherwise the connection won'twork.
6/10