Programming Heating Mode Operation Times - Baxi LUNA DUO-TEC IN+ Instruction Manual For Users And Fitters

1.6

PROGRAMMING HEATING MODE OPERATION TIMES

To enable the function, press the
Time period programming allows the setting of boiler automatic operation in heating mode in fixed time slots and on fixed days of
the week. Boiler operation settings can be made for single days or groups of consecutive days.
1.6.1 Single days
Four time bands (4 boiler activation and deactivation periods in heating mode even with different times from day to day) are
available for every day selected, as shown in the following table:
MONDY DAY 1 (monday)
TUEDY DAY 2 (tuesday)
WEDDY DAY 3 (wednesday)
THUDY DAY 4 (thursday)
FRIDY DAY 5 (friday)
SATDY DAY 6 (saturday)
SUNDY DAY 7 (sunday)
To set a single time band, proceed as follows:
• Press the IP button and then the button
• choose a day of the week (1...7) by repeatedly pressing the buttons +/-
• press the OK button;
• the display shows the message on 1 and the 4 digits of the time flashing, as shown in the
figure to side;
• use the buttons +/-
to set the boiler lighting time;
• press the OK button;
• the display shows the message of 1 and the 4 digits of the time flashing;
• use the buttons +/- to set the boiler switching off time;
• press the OK button;
• repeat the same operations from point 4 to set the remaining three time bands;
• press the IP button to exit the function.
1 Programming in HEATING MODE
PROGRAMMED TIME BAND
2
09:00 - 12:00
3 Day of the week: Monday
By setting the lighting time "on..." equal to the
switching off time "of...", the time band is cancelled and
the program goes to the next time slot. (ex. on1=09:00
– of1=09:00 he programme "skips" time band 1 and continues
with on2...).
1.6.2 Groups of days
This function enables the programming of 4 common boiler activation and deactivation time slots for several days or the entire
week (see the summary table below).
To set a single time band, proceed as follows:
• Press the IP button and then the button
• Select a GROUP of days by repeatedly pressing the buttons +/-
• press the OK button;
• repeat the operations described in points 4-10 of paragraph "Single days".
Summary table of available groups of days
Group "MO-FR" DAY
Group "SA-SU" DAY
Group "MO-SA" DAY
Group "MO-SU" DAY
7689490.01 (1-09/17)
button (the display shows the
On 1 Of 1
06:00 08:00
;
;
1 2 3 4 5
6 7 Saturday and Sunday
1 2 3 4 5 6
1 2 3 4 5 6 7 every day of the week
symbol).
FACTORY SETTINGS
On 2 Of 2 On 3
11:00 13:00 17:00
;
1
;
from Monday to Friday
from Monday to Saturday
8
Of 3 On 4
23:00 24:00
FACTORY SETTINGS
As per table in paragraph "Single
days".
07:00 – 23:00
As per table in paragraph "Single
days".
As per table in paragraph "Single
days".
Of 4
24:00
2
3