3.2
Rack Mounting Brackets
The Midspan is supplied with mounting brackets, plates and screws
utilized for assembling the Midspan in an 19-in rack.
1. Install two clip nuts on each bracket.
2. Tighten two brackets to both sides of the rack's rails using the
supplied plates and 10-32" screws as shown below.
DETAIL-A
2 PLS.
PLATE
SCREW CSK NF 10-32 (x2)
Power over Ethernet Solutions
RAIL
CLIP NUT
BRACKET
CLIP NUT
18
PD-6548
Cat. No.: 06-6860-056