Indicators; Primary Power Indicators; Port Indicators - PowerDsine PD-6548 User Manual

2.3

Indicators

A set of indicators provide the status of the Power over Ethernet Midspan and
its ports. Refer to Table 2-1 and Table 2-2 for status information during
operation.
2.3.1

Primary Power Indicators

A Primary Power LED (labled "AC") is located on the front panel; the LED
provides Power over Ethernet Midspan power status.
When the indicator illuminates in green, it means that the Midspan receives
AC power. The "AC" indicator lits in orange to indicate Built In test failure.
Refer to Table 2-1: for additional information.
2.3.2

Port Indicators

One uni-color indicator (green) per port provides port status:
Refer to Table 2-1 and Table 2-2 for additional information.
Note Due to the standard detection process performed on
each PoE port, power is not supplied to an Ethernet
device that is not PoE-enabled. In this way, PDs (non
PoE -enabled) are not affected by connection to
Midspan's output port.
Power over Ethernet Solutions
Green indicates that the PD (Powered Device)
is identified as "Power over Ethernet Enabled",
is active and receives power.
Blinking green indicates that the power is not
delivered to a specific port.
12
PD-6548
Cat. No.: 06-6860-056